Ceramic Ball Control Valve
Ceramic Ball Control Valve
Spec Sheet: KV Ceramic Ball Valve Series
Trim components of ceramic ball valves adopt Alumina or zirconia ceramic with high chemical stability and hardness (HRC88), only inferior to diamond.
Interested in this product?
Or call +44 7763 488809
Ceramic Ball Control Valve
The ceramic-lined valve has very good performance on abrasion erosion, and corrosion resistance, excellent heat-shielding, and electric insulation. Mainly used in electric power, petroleum, chemical, metallurgy, mining, sewage treatment, and other industries where the metal valve cannot be applicable.
The ball is made with advanced grinding equipment and advanced process technology that can ensure high precision ball roundness, and a good surface. The self-lubricating capability of ceramic ensures good sealing after polishing, which radically changed the defects that metal hard sealing valve has such as big torque, and non-corrosion-resistant sealing surface.
The ceramic valve adopts new high-tech type structural ceramic material as sealing and wearing parts, which can improve abrasion and corrosion resistance, and sealing performance, prolonging lifespan, 2-4 times of lifespan than Titanium Alloy and Monel valve. Using ceramic valves can reduce repair or replacement costs and improve the safety, and stability of the operating system.
This valve fits in granule medium of high hardness, or medium with erosion soft granule. Nominal pressure PN10-PN40, applicable temperature <-200 degrees
To enquire about this product or request a quote, call +44 7763 488809, email john@afcvalves.co.uk, or use our Contact Us page.
Product Specifications
The AFC Valves Ceramic Ball Control Valve combines the quarter-turn simplicity of a ball valve with a ceramic ball and seat for outstanding wear resistance in abrasive, corrosive, and high-cycle service. The alumina oxide or zirconia ceramic components are significantly harder than stainless steel, delivering a service life many times longer than a conventional metal-seated ball valve when handling slurries, abrasive chemicals, mining process fluids, and aggressive industrial media.
The ceramic ball and seat provide a tight bubble-tight shut-off even after extended service in conditions that would erode a metal seat beyond tolerance. Available in full-bore and reduced-bore configurations with manual, pneumatic, or electric actuation.
Key Specifications
- Size range: DN15 to DN200
- Pressure rating: PN16 / PN25 / PN40
- Body material: Stainless steel AISI 316 / carbon steel
- Ball and seat: Alumina oxide (Al₂O₃) 95% or zirconia ceramic (specify)
- Seals: PTFE or PEEK
- End connections: Flanged to BS EN 1092-2 / ANSI 150 / BSP screwed
- Bore: Full bore or reduced bore
- Actuation: Manual lever, pneumatic, or electric actuator
- Application: Mining slurry, abrasive chemicals, ceramic/glass industry, high-cycle isolation
To enquire about this product, request a datasheet, or get a quote, call +44 7763 488809 or email john@afcvalves.co.uk.






