A506 Pressure Sustaining with Solenoid Control Valve
A506 Pressure Sustaining with Solenoid Control Valve
Spec Sheet: Alpine ACV PT116-113 Pressure Sustaining – Relief +Solonoid Control A506-AFC
Installation, Operating, and Maintenance Manual: Alpine ACV-BT116-113-IOM-Pressure Sustaining – Solenoid Control Valve
Alpine Catalogue: ALPINE ACV
Certification: WRAS
The A506 is a pressure sustaining / relief valve. Two different functions are based on the installation place. The solenoid valve can control the valve to turn on or off.
Interested in this product?
Or call +44 7763 488809
A506 Pressure Sustaining with Solenoid Control Valve
Features:
·Top and seat ring guided stem and diaphragm assembly for long life and reliability.
• All iron components are fusion epoxy bonded for corrosion resistance.
• Easy maintenance without removal from the main line.
• Nylon reinforced diaphragm for long-term service.
• Drip tight shut off.
• Globe design for superior control characteristics.
• Ductile iron bodies for higher strength and durability.
• Corrosion-resistant stainless steel seat and disc retainer ring.
• Various pilots and accessories are available for configuration into many different applications.
• Special V-Port and double chamber are options, please consult the factory.
• Meet standards BS EN 1074-5, ISO 5208, BS EN 12266-1, BS EN 558-1,
General Application:
For pressure, flow, and level control in water applications.
Technical Data:
Size Range: DN50~DN800mm
Pressure Ratings: 1.0Mpa; 1.6Mpa; 2.5Mpa
Working Temperature:-100C- 800C
Suitable Media: Water
End connection: PN 10/ PN 16/ PN 25
Consult Factory for other applications
To enquire about this product or request a quote, call +44 7763 488809, email john@afcvalves.co.uk, or use our Contact Us page.
Product Specifications
The AFC Valves A506 is a multi-function hydraulically operated control valve that combines pressure sustaining with solenoid-controlled on/off operation. It maintains a preset minimum upstream pressure while allowing remote on/off control via a solenoid valve actuated by an electrical signal. This dual-function configuration is used in water distribution systems where both remote zone isolation and pressure sustaining are required from a single valve installation.
Typical applications include irrigation zone control, pump protection on trunk mains, and automated pressure management in district metered areas where SCADA or remote monitoring systems are in use. The solenoid operates on 24VDC or 230VAC depending on configuration.
Key Specifications
- Size range: DN50 to DN200
- Pressure rating: PN16
- Body material: Ductile iron GGG40
- Internals: Stainless steel AISI 316
- Seals: EPDM
- End connections: Flanged to BS EN 1092-2
- Solenoid voltage: 24VDC or 230VAC (specify on order)
- Solenoid type: Normally closed (NC)
- Pressure sustaining range: 0.5 to 12 bar
- Standard: BS EN 1074-2
To enquire about this product, request a datasheet, or get a quote, call +44 7763 488809 or email john@afcvalves.co.uk.






