FBGD – Double Eccentric Flange Butterfly Valve
Double Eccentric Flange Butterfly Valve
Spec Sheet: FBGD Spec Sheet
Other: Alpine Series 13 & 14 FBGD-torque settings table nm
Other: Alpine Double Eccentric Butterfly Presentation
FBGD is a double eccentric flange butterfly valve, with a soft seal on the body, it has the lowest operational torque, much less wearing, the dovetail seal design has been proven over half a century of service with reliability.
Interested in this product?
Or call +44 7763 488809
Double Eccentric Flange Butterfly Valve
Features:
. The valve is made of DI body and DI disc.
. Advanced newly design with dovetail seal design and captured by epoxy on the back, with multiple raised ring to have more contact with disc but less friction during closure.
. The double eccentric design provides less contact area of the seal with the disc and less stress at the open position of the disc.
. The disc design with arch shape and thru disc can provide better flow capacity, stronger and less weight
. The shaft and disc connection with a tangential pin can be exchangeable and provide a rigid connection.
. The DN 100-500MM uses a flat disc, and DN 600-1200MM uses arch shape disc.
. Epoxy-coated interior and exterior.
. Valve design meets or exceeds EN 593.
. Top flange connection meets ISO 5211-1982, and F/F meets EN 558-1 series 13 & 14.
Technical Data:
Size Range: DN100-1200mm
Ratings: 1.0Mpa; 1.6Mpa
Working Temperature: -10℃ ~80℃
Flow media: Water & Wastewater
Service Fields:
Waterworks system, wastewater
system, water distribution system,
HVAC system, industry, power plant.
Please consult the factory for higher pressure ratings.
Technical Specifications
| Type | Double Eccentric Flange Butterfly Valve |
|---|---|
| DN Range | DN100 to DN1200 |
| Pressure Rating | PN10 / PN16 |
| Body Material | Ductile Iron |
| End Connections | Flanged to EN 1092-2 |
| Standards Compliance | EN 593, ISO 5211, EN 558-1 Series 13 & 14 |
| WRAS Approved | Available on request |
| Operating Temperature | -10°C to 80°C |
To enquire about this product or request a quote, call +44 7763 488809, email john@afcvalves.co.uk, or use our Contact Us page.
Key Specifications
The FBGD Double Eccentric (High-Performance) Butterfly Valve is designed for tight shut-off isolation and throttling control in water, wastewater, and industrial pipeline systems. The double-eccentric disc geometry eliminates rubbing contact between the disc and seat during opening and closing, significantly extending seat life compared to concentric butterfly valves in high-cycle and abrasive service. The flanged body integrates directly between standard BS EN 1092-2 flanges without adapter spools.
Specifications Summary
- Size range: DN50 to DN1200
- Pressure rating: PN10 / PN16 / PN25
- Body material: Ductile iron GGG40 / carbon steel / stainless steel
- Disc material: Ductile iron, stainless steel AISI 316, or aluminium bronze
- Seat: EPDM, NBR, or metal seat (specify on order)
- End connections: Flanged to BS EN 1092-2 / ANSI 150
- Actuation: Manual lever or gearbox, pneumatic, electric, or hydraulic actuator
- Standard: BS EN 593, ISO 5752
- Application: Water distribution, wastewater, HVAC, industrial isolation
To enquire about this product, request a datasheet, or get a quote, call +44 7763 488809 or email john@afcvalves.co.uk.







