Floating Ball Valves
Floating Ball Valves
RR Series Ball Valve is in a two-piece body, floating ball, and side-mounted design. It is designed as per API608 and fire tested as per API607.
Sealing materials available for various pressure and temperature ranges are PTFE, PPL, PEEK, DELRIN, Molon, etc.
Interested in this product?
Or call +44 7763 488809
Floating Ball Valves
Specifications
Nominal Diameter: DN15-DN200, 1/2”-8”
Pressure Rating: PN10-PN100, Class150-1500
Face-to-face Dimension:
End Connection: RF Flanged
End Dimension: ASME B16.10
Leakage Class:
ANSI/FCI70.2-2006 Class IV/100;
ANSI/FCI70.2-2006 Class V;
ANSI/FCI70.2-2006 Class VI;
ISO5208 Rate D;
ISO5208 Rate A;
API 598.
Applications
They are widely used in Chemical, biochemistry, pulp & paper, chemical fiber, pharmaceutical, environmental protection, etc.
A locking device is designed to provide system protection by preventing mal-operation caused by the wrong operator and uncontrolled outdoor factors.
Hand lever with industrial art design is beautiful and rugged.
ISO5211 direct mounting plate design makes it easy to mount gear, pneumatic, or motor actuators.
The shaft ends in a flat square design as a local indication of the valve position.
It is with blow-out proof shaft. Sealing gasket supported shaft to provide back seat tightness.
Fire safe design to ensure the tightness with metal sealing after the soft material is destroyed.

To enquire about this product or request a quote, call +44 7763 488809, email john@afcvalves.co.uk, or use our Contact Us page.
Product Specifications
AFC Valves floating ball valves are quarter-turn isolation valves where the ball is held in position by the seats alone, allowing it to float slightly downstream under line pressure to create a tight seal. This design is reliable, simple, and cost-effective for general isolation service in water, oil, gas, and process industries across a wide pressure and temperature range. Floating construction is the standard choice for DN15 to DN200 sizes where operating torque and pipeline loads are within acceptable limits.
Available in carbon steel, stainless steel, and duplex materials with a wide range of end connections and seat materials to suit the service conditions. Manual lever, gearbox, pneumatic, and electric actuation options are available.
Key Specifications
- Size range: DN15 to DN200 (floating design)
- Pressure class: ANSI Class 150 / 300 / 600 or PN16 / PN25 / PN40
- Body material: Carbon steel A216 WCB / SS316 CF8M / duplex A890 4A
- Ball and stem: Stainless steel AISI 316 / A182 F316
- Seats: PTFE (standard) / PEEK / metal seat (high-temp)
- End connections: Flanged ANSI 150/300 or BS EN 1092-2 / BSP screwed
- Bore: Full bore or reduced bore
- Standard: API 6D / BS EN 17864
- Application: Water, oil, gas, petrochemical, general industrial isolation
To enquire about this product, request a datasheet, or get a quote, call +44 7763 488809 or email john@afcvalves.co.uk.






