P26U Pressure Management Valve (Flow Rate Based)

P26U Pressure Management Valve (Flow Rate Based)

Spec Sheet: P26U Spec Sheet

Installation, Operating, and Maintenance Manual: P26U IOM

Alpine Catalogue: ALPINE ACV

Certification: WRAS

P26U is a pressure management valve.

P26U can switch pressure based on high/low flow rate. The reading is from the water meter
with RS485.

Interested in this product?

Or call +44 7763 488809 

P26U Pressure Management Valve (Flow Rate Based)

Features:
• 10 years life lithium battery.
• A black control box and solenoid valve are connected to the control tube system.
• Controller box can be set either by timing or flow rate thru the remote controller.
• IP68 for water resistance.
• Comply with BS EN 1074-5, ISO 5208, BS EN 12266-1, BS EN 558-1
• Both P26M & P26U types have a control box and solenoid valve on the main valve.
• P26U- has 2 flow rate setting values (lower and higher level), to switch between the 2 different setting pressure.
• P26U- same main valve as P26M. The purchaser can combine either an ultrasonic or magnetic meter which can provide an RS485 signal connected to the control box
• Single remote controller can be fitted for multiple valve setting use, no matter number of valves

Technical Data:
Size Range: DN50~DN800mm
Pressure Ratings: 1.0Mpa; 1.6Mpa; 2.5Mpa
Working Temperature:-100C- 800C Suitable
Media: Water
End connection: PN 10 / PN 16 / PN 25
Consult Factory for other applications

P26U Pressure Management Valve (Flow Rate Based)

To enquire about this product or request a quote, call +44 7763 488809, email john@afcvalves.co.uk, or use our Contact Us page.

Product Specifications

The AFC Valves P26U is a flow-rate-based pressure management valve (PMV) designed for district metered area (DMA) inlet control in UK water distribution networks. Unlike a conventional pressure reducing valve that maintains a fixed downstream set point, the P26U modulates outlet pressure in proportion to flow rate — delivering higher pressure during peak demand periods and reducing pressure during low-demand periods overnight. This dynamic pressure management significantly reduces leakage and extends asset life across the distribution network.

The P26U is specified by water utilities and framework contractors on AMP capital delivery programmes where Ofwat leakage targets require active pressure management. The valve uses a hydraulic flow measurement element and a pilot valve assembly to achieve flow-modulated pressure control without external power or SCADA connectivity.

Key Specifications

  • Size range: DN50 to DN300
  • Pressure rating: PN16
  • Body material: Ductile iron GGG40
  • Internals: Stainless steel AISI 316
  • Seals: EPDM (potable water grade)
  • End connections: Flanged to BS EN 1092-2
  • Control type: Flow-rate modulated (no external power required)
  • Outlet pressure range: 1 to 10 bar (adjustable)
  • Standard: BS EN 1074-2

To enquire about this product, request a datasheet, or get a quote, call +44 7763 488809 or email john@afcvalves.co.uk.

P26U Pressure Management Valve (Flow Rate Based)
P26U Pressure Management Valve (Flow Rate Based)

View Product