SDCV – Slanted Disc Check Valve

SDCV – Slanted Disc Check Valve

Spec Sheet: Alpine slanted disc check valve

SDCV is a slanted disc check valve. It has a built-in air cushion for slow closing.
At the last 10% of the closing stroke, the air cushion will make the valve close slowly to avoid hard impact.

 

Interested in this product?

Or call +44 7763 488809 

Category: Tags: , ,

SDCV – Slanted Disc Check Valve

Features:
General Applications:

• No slam, mute
• Good performance for the anti-surge
• Easy maintenance
• Zero flow velocity and following shut-off valve
• Soft sealing acc. to the standard of EN 12334
• Nickel-based stainless steel seat, corrosion resistance, low wear coefficient, long-life, high reliability
• The soft lock device when open fully, not only reduce the loss of the head but also avoid the excessive swing
• Inclined seat, short closing time
• Arc-shaped disc
• Cushioned air according to the working conditions can be adjusted, to avoid water hammer impact
• Epoxy powder coating in line with GSK standard
• In case the flow velocity is really low, the cushion equipment can be changed to drive the valve opens fully
• Epoxy powder coating inside and outside according to the standard of GSK

General Applications:
• Pump protection
• The water network
• Soft seal check valve, tilting seat, can be fully opened by low flow velocity. Suitable for the water and wastewater pump systems

Technical Data:

Size Range: DN 200-1600mm
Pressure rating: PN10, PN16.
Max. temperature range: -100C to 800C

Slanted-Disc-Check-Valve-300x300.png

To enquire about this product or request a quote, call +44 7763 488809, email john@afcvalves.co.uk, or use our Contact Us page.

Slanted-Disc-Check-Valve
SDCV - Slanted Disc Check Valve

View Product