UL Groove Type Butterfly Signal Switch
Spec Sheet: HBF-300G-Butterfly Valve Groove
This UL Listed Grooved Type Butterfly Valve ( HBF-300G ) cuts or regulates the flow of fluid through the piping systems. Grooved Type Butterfly Valve for fire protection serves as a control valve that turns on / off the flow of water to the pipes serving the fire sprinkler system or standpipes system. The Grooved connection provides an easier and faster installation.
Hants is a sub-brand of ours, supplying high-quality valves & fittings for different industries.
Interested in this product?
Or call +44 7763 488809
UL Groove Type Butterfly Signal Switch
Features
◆ Lightweight and low-cost control over water flow.
◆ UL Listed Grooved Type Butterfly Valve is a suitable Fire Protection Piping Sprinkler System.
◆ Yellow Indicator that shows the operator which way the disc is facing.
◆ Includes an electronic tamper switch that communicates with a control panel and alarms when the valve’s disc rotates.
◆ Top/Test Standard ISO5211 / API 598
To enquire about this product or request a quote, call +44 7763 488809, email john@afcvalves.co.uk, or use our Contact Us page.
Product Specifications
The AFC Valves UL Groove Type Butterfly Signal Switch Valve is a grooved-end, lug-body butterfly valve with an integral tamper switch, carrying UL listing and FM approval for fire protection control valve service. The integral SPDT supervisory switch sends an alarm signal to the building fire alarm panel within two turns of the handwheel, providing mandatory tamper detection as required by NFPA 13 and BS EN 12845 on all control valves in the sprinkler system supply.
The grooved ends allow rapid installation using standard Victaulic-compatible couplings and the compact butterfly disc design reduces the installed face-to-face length compared to a gate valve. This valve is specified on fire sprinkler systems in commercial and industrial buildings across the UK and Ireland where grooved pipework systems are in use.
Key Specifications
- Size range: DN50 (2″) to DN300 (12″)
- Working pressure: 300 PSI (20.7 bar)
- Body material: Ductile iron
- Disc: Ductile iron with nylon coating
- Seat: EPDM
- End connections: Grooved to AWWA C606
- Switch type: SPDT supervisory switch (integral)
- Switch signal: Alarm within 2 handwheel turns from open position
- Listing: UL listed / FM approved
- Standard: NFPA 13, BS EN 12845
- Application: Fire sprinkler control valves, grooved pipework systems
To enquire about this product, request a datasheet, or get a quote, call +44 7763 488809 or email john@afcvalves.co.uk.





